오디오가이 :: 디지털처럼 정확하고 아날로그처럼 따뜻한 사람들
자유게시판

Guide To Ghost Immobiliser 2: The Intermediate Guide On Ghost Immobiliser 2

페이지 정보

작성자 Augustus Lutz
작성일

본문

311135906_1281855972636056_2987376612771239945_nlow.jpgGhost Immobiliser 2

Secures your vehicle from key cloning and stops thieves from driving it with the keys you originally had. Our latest immobiliser is connected to the CAN data network in your vehicle and a unique pin must be entered in order to start the engine.

Unlike trackers Ghost does not transmit radio frequency signals and cannot be detected using diagnostics tools. It does not have any LED indicators or buttons to signal its presence in your car or van.

Anti-key cloning

The ghost immobiliser is designed to combat key hacking and cloning. The device connects to the CAN data network of your vehicle and generates a unique pin code push sequence using the buttons from the factory on your dashboard as well as the steering wheel. This stops the criminal from being capable of starting your car. If the incorrect PIN is entered, it will prevent your engine from running and making it impossible for you to drive away with your joy and pride.

A ghost immobiliser is a new technology that is extremely difficult for thieves to defeat. Unlike physical deterrents like wheel locks and steering locks that can be cut off or ghost immobiliser 2 jacked, the ghost immobiliser is an invisible electronic device that cannot be recognized by ordinary thieves since it doesn't emit radio signals and is completely silent.

The next generation of immobilisers are able to protect your car from a myriad of threats including keys that are duplicated, key-hacking, and relay attacks. It can also stop the thief from adding a key or replacing your ECU since it will not allow them to start the vehicle without entering the correct PIN code.

Unlike other immobilisers, the ghost immobiliser 2 doesn't require a remote or key fobs to operate. It is deactivable through an app on the driver's smartphone. This is a great option when you need to give your car to valet parking, or for servicing without the key fobs.

The Autowatch Ghost-II is the latest version of our revolutionary ghost immobiliser. It is designed to be simple and easy to use, while still being as secure as possible. This is done by connecting the Ghost-II into the vehicle's data network CAN, which means there aren't any additional wires to hide or be easily located. It also comes with built-in features that allow users to disable the Ghost-II simply by connecting to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the newest method being used by professional car thieves to steal vehicles. Thieves can access your vehicle's OBD port with little more than an laptop, an app and ghost immobiliser 2 a few cables, which can be purchased on the internet for under PS50. Once they have access to your vehicle's OBD port, they can do whatever they want including setting fault codes, and tuning your vehicle to taking away your pride and joy in just a few seconds.

It can prevent your car from being taken away by requiring a unique PIN number to be entered with your key fob prior to you start the engine or leave. It does this by interacting with the vehicles ECU (Engine Control Unit) on the CAN Data circuit and is indetectable to any RF scanning or code grabbing technology. It also includes a Service/Valet mode that allows your vehicle to start without needing the PIN code.

To make use cost of ghost immobiliser an OBD hacking device you require an operating system that is capable of reading the OBD protocol, which can be bought for less than PS100 on eBay or Amazon. Also, you will require a cable with OBD pins connected to the CAN Bus. These cables can be purchased on Amazon/Ebay around PS50. The cable must be connected to the wiring harness of your car, such as the radio wiring harness.

Once the hacker has access to the OBD port of your vehicle, they can send diagnostics to the system at a high baud rate that will cause a crash of the car's CAN and stop the system from functioning. This could cause your vehicle's engine to stall or stop working.

No additional key fobs or remotes are required.

The car immobiliser is a fantastic piece of anti-theft technology utilized by millions of modern cars all over the world. An aftermarket immobiliser helps protect your vehicle through the use of engine ECU software that blocks cars from starting if a false transponder is transmitted.

However, it could be easy for thieves to bypass an immobiliser system in the event that they have access the code to deactivate it. The battery in most key fobs can be removed by prying it open, so a thief can employ a simple tool remove the immobiliser's inner circuit board and replace it with the blank. They will then be able start your car.

With the TASSA approved Ghost 2 immobiliser, there are no additional keys or remotes required. The immobiliser connects directly to the vehicle's ECU (Engine Control Unit). This is done via a discrete, quiet CAN data loop that cannot be detected by diagnostic tools such as those used by high-tech thieves. It also does not utilize a traditional key fob with LED indicators, meaning it's not visible at sight.

There will be times that you must deactivate Autowatch Ghost 2's auto-protection for instance, during the valet parking or servicing. The ghost CAN immobiliser has a dedicated mode to do this, referred to "Service Mode that can be activated with just a push of the button on your smartphone. The car can still be operated, but the maximum speed is restricted to 36mph for greater security.

If you'd like to learn more about the TASSA accredited ghost immobiliser, contact us now to schedule an appointment in our workshop. A member of the team will run through an in-depth explanation of the process and provide you with owner's manuals, installation certificates, Ghost 2 emergency card and security assurance.

Simple PIN code change process

Ghost is a next generation device that secures your vehicle without cutting wires or adding aftermarket key fobs. It connects directly to the vehicle's CAN data network. A personalised PIN is created using buttons on the steering wheel and dash. The device does not emit RF signals, therefore it is unable to be manipulated. This makes it unrecognisable by sophisticated RF scanning or code grabbing techniques that modern thieves employ.

The PIN code is able to be changed to lock out previous drivers or even include an override code if you forget the sequence. The installer will show you how to do this during installation. The system also comes with the option of a valet mode that can be used to temporarily disable the pin input sequence to allow your garage or mechanic can service the car without having to know the code. This is a great option for customers who don't wish their pin sequence to be disclosed, but wish to leave their car with valet parking or service.

Unlike Thatcham products which require additional key fobs to operate, Ghost is a discreet system that makes use of the buttons inside your vehicle to create a unique and interchangeable PIN code sequence. This sequence is entered through the app for smartphones, meaning there are no additional LEDs thrown and your car is protected with no risk of being disabled by hackers or any other technology.

Tested for every vehicle

A ghost immobiliser, in contrast to key fobs that require pressing buttons, is discretely installed under the dash or steering wheel. You won't even know it's there. The device is connected to the CAN network of your vehicle and a PIN number can be programmed using the buttons on your vehicle. The system won't allow your car to start until the code is entered. This means that thieves can't clone the keys of your vehicle or gain access to the OBD to hack into it.

Ghost can be utilized in all vehicles that use electric vehicles, vans, motorhomes and bicycles. It's also extremely flexible and can be programmed to turn off in various scenarios. It can be programmed to go into Valet mode, for instance when the vehicle is transported to a valet company or parking company. This means that your car can be operated within a set 30mph speed limit, and the ghost immobiliser will activate itself when it is returned to your property.

The device can be reset at anytime to your personal PIN code. This is a great option if you forget the code or if the device becomes unusable.

It's also important to note that the device is completely unnoticeable to anyone who isn't familiar with it. It does this by analyzing the buttons on your dashboard and steering wheel and then using the information it sends to identify which button was activated. This makes it a safe and reliable security system that cannot be tampered by RF scanning or jamming, or even a door lock pick set.

관련자료

등록된 댓글이 없습니다.

+ 뉴스


+ 최근글


+ 새댓글


통계


  • 현재 접속자 705 명
  • 오늘 방문자 4,537 명
  • 어제 방문자 4,951 명
  • 최대 방문자 15,631 명
  • 전체 방문자 12,905,302 명
  • 오늘 가입자 1 명
  • 어제 가입자 0 명
  • 전체 회원수 37,554 명
  • 전체 게시물 299,946 개
  • 전체 댓글수 193,404 개